The PET 3 in 1 rinsing filling capping machine is used in production of non-soda drink of mineral-pure water packed in polyester bottles. Washing, filling and capping are integrated in one machine.
 
The most advanced technology from Japan and Germany is employed in the design. The gravity fixed liquid surface filling is used.The filling is fast, the amount of liquid is accurately controlled and the dropping and leakage are avoided.

Spring cramps are used in the bottle washing process. The empty bottles can be turned over 180~ along the conveying rail. There are two times of internal and external washing, the efficiency of bottle washing is high.
 
The magnetic torque is used for screw capping. The power of screw capping can be adjusted without steps. The power of the screw capping can also be fixed, and the caps will not be damaged, the capping is reliable.
 
The whole machine is controlled by PLC with touch-screen as the human-machine interface. The amount of the drinks in the storage tank can be controlled automatically. The filling and capping will be stopped automatically when there is no bottle. When bottles are cramped wrongly or when caps are not available, the machine can be stopped automatically.

The frequency changing technology is used to adjust the operation speed sleeplessly. The production capacity can be displayed digitally and can be adjusted conveniently.
 
-Technical Parameters-

Model	CGF18-18-6	Dimensions	215017502400mm
Capacity	6000BPH	Bottle Type	PET Bottles
Filling Range	200ml---2000ml	Cap Type	Plastic Screw Cap
Voltage	220/380V	Suitable For	Non-carbonated Water

-Detailed Images-

Washing Part

1) Into bottle way is air conveyor direct connection with Bottle dial .

 2) All 304 stainless steel rinse heads, water spray style inject design, more save water consumption and more clean .
 
 3) The gripper equipped with high-efficient spray nozzle, it can develop to any position of inwall of the bottle, and can save rinsing water. 
 
 4) Rinsing time can be guaranteed for 4 seconds. 
 
5) The supplying of rinsing water is controlled by solenoid valve.

Filling Part

1) Adopted Germanyanti-corrosion non-maintaining bearing that can reduce the pollution of filling to the environment. 

 2) The rotate plate is made of SUS AISI304, large flat toothed bearing. 
 
 3) The whole valve is made of 304 stainless steel.
 
 4) The filling system has a CIP circulation system to wash the pipeline and fake-cup used for cleaning filling valve. 
 
 5) The liquid supply adopts the automatic pneumatic valve magnetic liquid-level switch to control the liquid tank automatically.

Capping Part

1) Place and capping system, electromagnetic capping heads, with burden discharge function, make sure minimum bottle crash during capping
  
2) A bottle inlet detect switch is settled on the screwing capper. 
 
 3) No bottle no capping
 
 4) Automatic stop when lack of bottle
 
 5) The motivation of the screwing capper is derived from the driven system in the framework and passed by gear.

Inquiry Cart 0